• • Step 6 – Install the Controller,Charger,Contactor
  • Step 5 – Install the motor
  • step 4 – Intstall the Wheels and tires
  • Step 3 – Assemble the steering system
  • Step 2-install shock absorber and rear swing arm
  • Step 1-Paint
  • The BugE
  • UH-13P Back from Paint
  • UH-13P Update
  • Lift Duct moves forward

• • General
  • Hull
  • Lift
  • Steering
  • Thrust

• • October 2008
  • September 2008
  • August 2007
  • June 2007
  • April 2007
  • March 2007
  • February 2007
  • January 2007
  • December 2006

• • WordPress.com
  • WordPress.org

• • Register
  • Log in
  • XHTML

The steering system is moving like pond water as a result of very little guidance and many different possibilities. We tried to hotr wire the rudders like previously mentioned. Now we’ve tried to use expandable foam (great stuff style) inside fan fold foama nd had trouble with it not curing in places. We attributed that [...]

This week the lift system has made some headway. They got the duct inner wall glassed around the circular form and are ready to begin the outer duct form. We’ve discussed how to do this and have come up with using the 2" foam like UH recommends. It should go pretty quickly. They just have [...]

This week we’ve made some significant progress on the thrust system. We got the two pieces of 1/8" plywood glassed together around the circular form. We need to cut them to length now and close the duct. Also yesterday we got the back side of the 2" foam completely glassed. We will cut them to [...]

It has been a while since I’ve updated the build log so I’ll do that now. I don’t have pictures now, but anything is better than what I’ve been doing.
The hull was assembled last Friday. We did put carbon fiber cloth in the center of the two layers of foam. I’m not sure yet what [...]

• WP Themes

  • Activate
  • Blindigo
  • Blue Zinfandel
  • Eye Candy
  • Detour
  • Frequency
  • Gladiola
  • Radiance
  • Vertigo
  • Vertigo Squared
  • Wonderland